Firman H08053 El Manual Del Propietario página 30

any spilled gasoline.
•
Do not check for leaks with a lighted match or flame.
•
The LPG cylinder valve should be fully closed when the generator is not in use or is running with
gasoline.
•
If you smell gas: close off the gas supply. Make sure there is no leak before using the generator.
WARNING
•
Device used for handling LPG must be installed
and used in strict conformance with NFPA 58
(Liquefied Petroleum Gas Code) and NFPA 54
(National Fuel Gas) and all other codes,
regulations
recommendations.
•
Never use a gas container, LPG connector hose,
LPG cylinder or any other fuel item that is
damaged or appears damaged.
•
The LPG cylinder valve should be fully closed
when the generator is not in use or is running
with gasoline.
English
and manufacturer
•
The regulator/hose assembly and cylinder
valve must be inspected before each use for
leaks or sign of damages.
•
If you smell gas: close off the gas supply.
Spray a soapy water solution to check all
connections for leaks before attempting to
use generator. Contact a qualified technician
to inspect and repair the LPG system if a leak
found before using the generator.
Use only 20 or 30 lb capacity cylinders with
Type 1, right hand Acme threads with this
generator. Verify the re-qualification date on
the tank has not expired. Do not use rusted or
damaged cylinders.
All new cylinders must be purged of air and
moisture prior to filling. Used cylinders that
have not been plugged or kept closed must
also be purged. The purging process should
be done by your propane gas supplier.
Do not connect or disconnect the LPG cylinder
in enclosed area.
Customer Service: 1-844-FIRMAN1Page 20