Turning On The Tool; Checking The Function - Prebena PKT-8-PR100 Traducción Del Manual Del Usuario Original

Before operation
✓ Then the battery can be pulled out towards the front.

Turning on the tool

The tool can only be turned on if the triggering mechanism and
safety bar are not activated (in the original position).
▶ Turn on the tool by pressing the ON/OFF button (1) on the control
panel for at least 2 seconds:
✓ The green LED (2) is lit continuously.
The tool turns itself off automatically after 10 minutes if it has
not been activated in any way.

Checking the function

▶ Set the tool tip of the fastener driving tool on a piece of wood at
least ten centimeters thick.
▶ Choose the triggering process: Single triggering or contact
triggering (see page 46).
44
WARNING
Danger due to faulty fastener driving tool.
The operator may injure himself or others and
damage the materials in use.
▶ Never use a fastener driving tool that is not
working properly.
▶ Send it to the manufacturer for repairs.