Safety Warnings; Additional Resources; Safety Symbols; Intended Use - Danfoss VLT OneGearDrive Serie Guia De Instalacion

VLT® OneGearDrive®

1 Safety Warnings

1.1 Purpose of the Installation Guide
The purpose of this installation guide is to describe the installation of the VLT
The VLT OneGearDrive is available with 2 different motor types:
® ®
• LA10 (type code L09), service period since August 2015.
• V210 (type code L06), since August 2015.
Check the motor type on the nameplate.
-
If exchanging a VLT OneGearDrive
®
model in the drive. Contact Danfoss Service for further instructions.
-
For reasons of clarity, the instructions and safety information do not contain all information relating to all VLT
Drive types and cannot take into account every conceivable case of installation, operation, or maintenance. The information
®
is limited to that which is required for qualified personnel in normal working situations. Contact Danfoss for further assis-
tance.
Compliance with the information in this operating guide is a prerequisite for:
• Trouble-free operation.
• Recognition of product liability claims.
Therefore, read this installation guide before working on or with the VLT

1.2 Additional Resources

The full VLT OneGearDrive Operating Guide is available online at http://drives.danfoss.com.
® ®
Table 1: VLT OneGearDrive Operating Guide
® ®
Document
VLT OneGearDrive Operating Guide
® ®

1.3 Safety Symbols

The following symbols are used in this guide:
Indicates a potentially hazardous situation that could result in death or serious injury.
Indicates a potentially hazardous situation that could result in minor or moderate injury. It can also be used to alert against un-
safe practices.
Indicates important information, including situations that can result in damage to equipment or property.

1.4 Intended Use

The VLT OneGearDrive is intended for commercial installations, unless otherwise expressly agreed. It complies with the standards
® ®
of the series EN 60034/DIN VDE 0530. Use in a potentially explosive atmosphere is forbidden, if not expressly intended for this pur-
Danfoss A/S © 2021.06
N O T I C E
with LA10 motor type with a V210 motor type, always ensure to update the motor
®
N O T I C E
Contents
Information about the installation, commissioning, and operation of the VLT
Drive .
®
W A R N I N G
C A U T I O N
N O T I C E
OneGearDrive .
® ®
OneGearDrive .
® ®
AN36362778401501-0001 / 130R0614 | 5
OneGear-
®
OneGear-
®