CONNECTING AN OPTIONAL DEVICE
A wide range of optional devices can be connected to your
home cinema system.
AUDIO/VIDEO OUTPUTS:
• Audio/video output (Yellow/White/Red cable included):
Connect to the audio/video input on the television.
• S-Video Output: Connect this socket to the S-Video
input on the television.
• TV SCART Output (cable not included): Connect to the
SCART socket on the television.
• HDMI Output (cable not included): Connect this output
to the HDMI input on your TV for optimal image and
sound quality.
• Coaxial output (cable not included): Connect the
coaxial socket to the socket on an amplifier for good
quality sound.
• Component video (YUV) Outputs (Green/Blue/Red
cable not included): Connect to the outputs on the
television to receive HD images.
Note: These sockets MUST NOT be plugged into
standard composite video inputs (Audio/Video).
~100-240V
50/60Hz 105W
AC INPUT
100-240V~ 50/60Hz
H T 220
FM :
87. 5- 108MHz
8
TV
AMPLIFIER
HOME CINEMA
HT450
CONNECTING AN OPTIONAL APPLIANCE
TV
OUT
TV
75 ohm
TV
FM ANT IN
S/N:
25*4mm
TV
TV
AUDIO INPUT
Auxiliary audio input
• You can connect audio devices such as your PC,
laptop, iPod/iPhone, CD player or MP3 player to the
unit, connect the headphone jack of a peripheral audio
device to the socket LINE IN of the device, using a
audio cable (jack cable /RCA not provided).
• To hear the television sound: connect the LINE IN
sockets to a Peritel/RCA adaptor (Peritel/Audio output
not supplied) using an audio cable (Red/White, not
supplied). Then connect this adaptor to the television's
Peritel socket.
PACKAGING CONTENTS
• 1 subwoofer.
• 1 central speaker.
• 2 front speakers.
• 2 rear speakers.
• 1 remote control + 2 1.5V LR03/AAA batteries.
• Speaker connection cables.
• 4 bases.
• 4 screws + 4 washers.
• 1 RCA audio/video cable.
• 1 FM cable.
• 1 user's manual.
SPEAKERS ASSEMBLY
• Installing the speaker stands.
• Fit the speaker stand on the base and secure it using
the round end plate and the screw as shown in the
diagram below.
Speaker
Nut
Base
Washer
17
EN