Nexxt Solutions Smart Wi-Fi IR Manual De Instrucciones página 6

You must connect to a 2.4GHz WiFi network. Enter your
network password. Make sure you enter the correct
password, otherwise the device will not connect.
Important: During this process, make sure to maintain the
router and the controller as close as possible, and free from
any obstructions not to degrade the quality of the signal.
Step 2
9:41 AM 60 %
9:41 AM 60 %
Connect the device to DC power using the supplied USB
cable. The blue LED will start blinking rapidly to indicate
that the device has entered into the pairing mode. Click on
Con rm that indicator is rapidly blinking.
Once the pairing mode is complete, the blue LED will turn
o .
Step 3
9:41 AM 60 %