Wisecomm CW5700 Manual Del Usuario página 7

WIRELESS RECEIVER-CW5700RX
1. ANTENNA 8. CH4
Receives the audio and video This light is lit when CH4 has
signals. been selected.
2. USB indicator 9. MOUNTING BRACKET
The red LED is lit when the For the receiver to stand.
receiver is connected to computer
10. POWER ON/OFF SWITCH
with USB cable. Switch for the power On/Off.
3. POWER INDICATOR 11. DC IN
The red LED is lit when the Plug the 8V adapter (Supplied)
power is on. 12. AV (AUDIO/VIDEO)
4. AUTO SWITCHING OUTPUTJACK
INDICATOR Connect the supplied A/V cable to
The yellow LED is lit when in the the jack. Plug the yellow.
sequencing mode. colored RCA to the VIDEO IN on
the monitor / TV and the white
5. CH 1
The light is lit when CH1 has colored RCA to the AUDIO IN
been selected. respectively.
6. CH 2 13. CHANNEL SELECTION
This light is lit when CH2 has BUTTON
been selected Use to find optimal reception.
7. CH3 Must select the same channel on
This light is lit when CH3 has both transmitter and receiver.
been selected. 14. Connector to USB
Transfer signal to USB connector.