Uline H-5333 Guia Del Usuario página 3

15. Place paper ramp onto paper entrance funnel
and secure with 10-32 x 1/2" bolts (6), ensuring bolt
head is on the inside of the funnel. Secure with #10
locking washers (6) and 10-32 nuts (6) underneath
the paper ramp. (See Figure 7)
Figure 7
Entrance
Funnel
CAUTION! If the bolt head is not on the inside of
the funnel, paper can catch on the bolt shaft
and nut.
1. Plug power cord into a standard 115V outlet.
2. Make sure power switch is turned off.
3. Load kraft paper
onto the paper
cradle with
the paper roll
unspooling from
the outside.
(See Figure 7)
4. Pull end of paper
up towards the
paper entrance
funnel and fold
paper into itself in
a rough triangle
shape. (See
Figure 8)
PAGE 3 OF 13
ASSEMBLY CONTINUED
Paper
Ramp
OPERATION
Figure 7
Figure 8
16. Insert blue motor
connector plug into
the blue plug on top of
power box and give a
quarter twist to lock.
(See Figure 8)
17. Insert gray foot pedal
connector plug into the
gray plug on the bottom
of the power box and
give a quarter twist to
lock. (See Figure 8)
NOTE: Both plugs
will click when
locked in place.
5. Insert paper
Figure 9
into the paper
entrance
funnel. Using
the threading
disk, turn knob
clockwise until
it catches the
paper and
feeds it through
the head and
out the exit shoot. (See Figure 9)
6. Press down on the foot pedal to eject paper from
the exit shoot.
NOTE: The machine will continue dispensing
paper until foot is let off the foot pedal.
7. Release foot pedal.
8. Grab the ejected paper and pull strongly in a
downward motion to tear paper from the machine.
Figure 8
Motor
Connector
Power Box
Foot Pedal
Connector
Threading
Disk
0621 IH-5333