Installation Steps; Care And Cleaning - AVS Ventvisor Deflector Instrucciones De Instalación

Installation Steps

Align the driver side visor with the previously cleaned
3
With the visor in its final position, remove the remaining
tape liner by pulling on free ends.
5
4 Piece Set
rear visor in final position
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
trim.
The rear visor attaches with same preparation methods as the front visor.
Repeat Steps 1 thru 7 for the passenger side.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Press the exposed area of tape against the surface and
4
Press along visor flanges to ensure proper adhesion.
6
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
verify position.