Frothing Milk - HURAKAN HKN-ME709 Manual Del Usuario

Press the " add powder "
button
ATTENTION!
The appropriate amount of coffee powder which going to the funnel should be no more than
one flat spoon.
2.3.5 Milk-Frothing Device

2.3.5.1 Frothing milk

Fill milk into a milk jug, then pull the pipe out fromthe slot, and immerse it into the jug.
Place a mug under the device. Press the button
STEAM PREPARING, PLEASE WAIT...
Once the steam ready, turn the tiny knob on the device to milk frothing mode (See Fig.2), and
then the device will start to frothing milk. Press the steambutton on the machine to stop
frothing when the milk foammeets your expectation.
Please clean the device after use.
Fill fresh water into a jug, immerse the pipe into it, and press the steambutton to start
cleaning.
Refer Fig.3 to switch to hot water mode.
Refer Fig.4 to switch to steammode.
One flat spoon
Add appropriate amount
of coffee powder
Press steambutton to
start heating up
Turn the knob to the place
as showed for hot water
Choose single cup
or double cup
to start heating up, the screen shows
Turn the knob to the place
as showed to froth milk
Press the steam button
for steam
EN
35