Personal Safety - Casals VC800PELM Manual De Usuario

from heat, oil, sharp edges
or moving parts. Damaged or
entangled cords increase the
risk of electric shock.
- When operating the power
tool outdoors, use an exten-
sion cord suitable for outdoor
use. Use a cord suitable for
outdoor use reduces the risk of
electric shock.
- If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use
of an RCD reduces the risk of
electric shock.

PERSONAL SAFETY

- Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while
you are tired or under the
influence of drugs, alcohol
or medication. A moment of
inattention while operating pow-
er tools may result in serious
personal injury.
- Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust mask,
non-skid safety shoes, hard
hat, or hearing protection used
for appropriated conditions will
reduce personal injuries.
- Prevent unintentional starting.
Ensure the switch is in the
off-position before connect-
ing the power source and/
or battery pack, picking up
or carrying the tool. Carrying
power tools with your finger on
the switch or energizing power
tools that have the switch on
invites accidents.
- Remove any adjusting key
or wrench before turning the
power tool on. A wrench or a
key left attached to a rotating
part of the power tool may result
in personal injury.
- Do not overreach. Keep
proper footing and balance at
all times. This enables better
control of the power tool in
unexpected situations.
- Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair and clothing
away from moving parts.
Loose clothes, jewellery or long
hair can be caught in moving
parts.
- If devices are provided for the
connection of dust extraction
and collection facilities,
ensure these are connected
and properly used. Use of dust
collection can reduce dust-rela-
ted hazards.
- Do not let familiarity gained
from frequent use of tools
allow you to become compla-
cent and ignore tool safety
principles. A careless action
can cause severe injury within a
fraction of a second.