Care And Maintenance - Zonair3D AIR MOVE + Guia De Inicio Rapido

Switching on the Air Move +
This device is Plug&Play. It does not require any previous confi guration.
Once the purifi er is connected to the car cigarette lighter socket, the ON/
OFF button will faintly glow (normally, the vehicle should be running).
To turn on the purifi er, gently press the ON/OFF switch once and
1
hold for 1 second. The intensity of the ON/OFF switch light will
increase. By default, the purifi er is activated in AUTO mode.
To change the operating mode:
2
- From AUTO to SILENT, press the ON/OFF button for 1 second.
- From SILENT to BOOST, press the ON/OFF button for 1 second.
- To return to AUTO mode, press the ON/OFF button for 1 second,
and so on.
Switching off the Air Move +
To turn off the purifi er, press the ON/OFF button and hold for 2
seconds.
You will hear two consecutive beeps and the indicator light will dim,
but will not turn off completely.
AIR MOVE + · 12

Care and maintenance

Air Move + is a product with a unique design,
manufactured with high-quality materials. To
keep the device in optimum condition, read the
instructions below:
Cleaning and maintenance:
· Disconnect the device from its power
supply before cleaning or carrying out
maintenance on the equipment.
· To clean the exterior of the Air Move +,
use a cloth dampened with water and, if
necessary, with a neutral detergent.
· Do not pour liquids through the air
outlet of the device (upper opening).
· Do not use solvents or corrosive
materials, as they could damage the
surface of the device.
· The Air Move + works with a fan that
does not require maintenance.
· Do not attempt to repair or adjust any
mechanical parts of the device.