Installation & Preparation; Attire; Set-Up; Engine/Burner Fuel Tank - Mi-T-M Corporation GPH-2000-OM1R Manual Del Operador

DANGER
risK of eXplosion or fire!
do not place unit in an
area wHere flammable
gas Vapors may be present.
a sparK could cause an
eXplosion or fire!
risK of unit bursting!
do not store/operate unit
in freeZing enVironments!
WARNING
risK of aspHyXiation!
-do not operate in an
enclosed area. use tHis
product only in well
Ventilated areas!
-tHe eXHaust contains
c a r b o n m o n o X i d e ,
poisonous, odorless and
inVisible gas. breatHing
tHis gas can cause serious
inJury, illness & possible
deatH.
DANGER
risK of fire!
- d o n o t s m o K e w H i l e
fueling!
-do not fill tHe fuel tanK
wHile unit is running or
Hot. allow unit & engine
to cool for two minutes
before refueling.
-do not fill fuel tanK to
point of oVerflowing.
allow approXimately 1/4"
of tanK space for fuel
eXpansion.
WARNING
risK of eXplosion or fire!
always store fuel away
from tHe wasHer wHile tHe
unit is running or Hot.
0
All manuals and user guides at all-guides.com
installation & preparation

attire:

Proper attire is essential to your safety. It is advised to utilize whatever means
necessary to protect eyes, ears, and skin.
respiratory mask) may be required when using detergent cleaning agents with
this washer.

set-up:

. This unit should only be placed on a level surface to ensure proper lubrication
for the engine and water pump while operating. NEVER spray water directly
on the unit.
2. Do not use unit in an area:
a. with insufficient ventilation.
b. where there is evidence of oil or gas leaks.
c. where flammable gas vapors may be present.
This unit has multiple ignition sources that could cause an explosion or
fire.
3. Do not allow the unit to be exposed to rain, snow or freezing temperatures.
If any part of the unit becomes frozen, excessive pressure may build up in
the unit which could cause it to burst resulting in possible serious injury to
the operator or bystanders.
4. Be certain to block the wheels to prevent the unit from moving while
operating.
5. Pump oil level should be checked before each use. Check the oil level
indicator on the pump crankcase. Make certain the oil is in the center of
the oil sight glass before each use. If the level appears to be low, fill with
the following pump oil: DO NOT OVERFILL!
Model #
3NXE3
a
3NXE4

engine/burner fuel tanK:

. Review "Risk of Explosion or Fire" Warnings pg. 4, before fueling.
2. Locate the Safety Decals on your unit and heed their warnings.
3. gasoline engines: A minimum of 85 octane fuel is recommended for use
with this unit. DO NOT MIX OIL WITH GASOLINE.
burner fuel: Use No.  or No 2 fuel oil/diesel or kerosene.
4. Purchase gasoline fuel in quantities that may be used within 30 days. Use
of clean, fresh lead-free gasoline is recommended. Leaded gasoline may be
used if lead-free is unavailable. DO NOT use gasoline containing methanol
or alcohol.
5. Check the engine oil level before starting the engine.
manual.)
6. Fill fuel tanks according to accompanying manufacturer's instruction
manual.
7. Refer to the Engine Manual supplied with this unit for proper engine adjustment
procedures.
8. review the engine manual accompanying this pressure washer for
correct engine start-up and maintenance procedures.
Pump Oil
75W0 Gear Lube.
SAE30W non-detergent (Grainger Item #4ZF2).
Additional safety attire (such as
(See Engine
GPH-SERIES Operator's Manual