Troubleshooting Guide - Gym Master GM97816 Manual De Instrucciones

Problem
Treadmill will not 1.
start 2.
3.
4.
Running belt slips 1. Running belt not tight enough
2. Drive belt not tight enough
Running belt 1.
hesitates when 2.
stepped on
Running belt is off Running belt tension not even across
centered the rear roller
Owner's Manual
TROUBLE SHOOTING GUIDE
Potential Cause
Not plugged in
Safety tether not inserted
House circuit breaker tripped
Treadmill circuit breaker tripped
On/Off switch on OFF
Insufficient lubrication
Running belt too tight
Corrections
1. Plug into grounded outlet.
2. Insert safety tether into monitor.
3. Reset or replace fuse.
4. Lubricate treadmill deck and
reset.
5. Turn on/Off switch to ON
1. Adjust running belt tension
2. Adjust drive belt tension
1. Apply silicone lubricant
2. Adjust running belt tension
Center the running belt
19
20