After Ironing; Maintenance - Imetec TITANOX K113 Instrucciones De Uso

temperature adjustment knob (2) [Fig. D].
If the selected temperature is too low, water droplets may drip from the plate.
Warnings: the plate temperature LED (1) goes on intermittently while ironing,
thereby indicating that the selected temperature is maintained.
SUPER-STEAM AND VERTICAL STEAM
Press the super-steam button (4) to generate a strong shot of steam that penetrates the
fabric and eliminates the most difficult creases [Fig. E].
Wait a few seconds between each pressing action of the iron.
Press the super-steam key (4) intermittently to iron in an upright direction (curtains, hung
clothes, etc.) [Fig. F].
Warnings: the super-steam function can only be used at high temperatures.
Stop the steam when the plate temperature LED (1) lights up and start ironing
when this goes off.
SPRAY FUNCTION
Verify that there is water in the reservoir (10).
Press the spray button (3): slowly for dense spray or fast for mist [Fig. G].
Warnings: dampen delicate fabric using the spray function (3) or alternatively,
lay a damp cloth between the fabric and the iron.
Do not use the spray on silk or synthetics.
EMPTYING PROCESS
Disconnect the plug (12) from the socket.
Open the latch (6)
Empty the reservoir (11) by turning the iron upside down and shaking it lightly.
Let the iron cool down completely.
Always set the iron upright.
CLEANING
ATTENTION!
Make sure the plug of the appliance (12) is disconnected from the
socket and the plate has cooled down completely before cleaning the
iron.
Any starch deposits or residue on the surface of the plate can be removed with a damp cloth
and non-abrasive liquid detergent.

AFTER IRONING

MAINTENANCE

EN
15