Preset Programs - DENTSPLY Multimat 2 Touch Manual De Instrucciones

9 Preset programs

9.1 Firing table for Ceramco 3 metal ceramics (Dentsply Mode)
(Use honeycomb firing material carrier.)
Prog. Firing Preheat
No. program temp.
(°C)
302 D-C3- 500
Paste opaque
303 D-C3- 650
Powder opaque
304 D-C3- 650
Margin
305 D-C3-Opaque 650
dentine/
Dentine effect/
Dentine
enamel
306 D-C3-Glaze 650
without
Glaze liquid
307 D-C3- 650
Glaze with mit
Glaze liquid
308 D-C3- 650
Correction
(Add-On)
D = Dentsply Modus
Dentsply Ceramco 3-metal ceramic
C3 =
Firing temperatures are recommendations.
Make a test firing and adjust firing temperatures and times, if required.
For a large number of objects, temperatures or times must be increased appropriately.
All manuals and user guides at all-guides.com
Drying Preheat Vacuum-
(min) (min) level
(hPa)
05:00 03:00 50
05:00 05:00 50
05:00 05:00 50
05:00 05:00 50
03:00 03:00 0
03:00 03:00 0
05:00 05:00 50
Heating Firing Vacuum
rate temp. time
(°C/min) (°C) (min)
100 975 00:01
70 965 00:01
70 965 00:01
45 930 00:01
45 920 00:00
55 925 00:00
55 920 00:01
Firing Cool
time stage
(min)
00:01 0
00:01 0
00:01 0
01:00 0
03:00 0
00:30 0
00:01 0
77