Operation - Lacor Mix & Go 69382 Instrucciones De Uso Y Mantenimiento

1.- Remove the packaging before using the appliance. Do not dispose of the packaging until it has
been checked that operation is correct.
2.- Be sure to place the unit on a flat, hard surface, avoid contact with areas with excessive heat.
Check the cable and socket are undamaged.
3.- Prepare the fruit (e.g. cut apple, carrot or other fruit in pieces). Place all ingredients, water or
ice cubes in the bottle (4-10).
NOTE: Do not exceed the maximum line on the pitcher. The mixture should never exceed 60°C
temperature.
4.- Remove the plug (3) installed on the bottle and screw the blade assembly (6) into place. Close
it completely as if it were a cap.
5.- Then insert the bottle into the body (8) of the beater, matching the arrows of the blade
assembly with the mark on the body. Turn the bottle clockwise to leave it fixed and turn the
safety switch on.
6.- Press the ON/OFF button (7) to start the motor. The unit will be in operation as long as the
ON/OFF button is pressed. To stop the motor, remove the hand from the switch.
7.- While using the appliance, if there is an obstruction, remove the bottle by turning it
counterclockwise. Unscrew the blade assembly and remove food with a spatula. Reconnect
the bottle to complete the process.
NOTE: To protect the useful life of the motor, do not keep the appliance switched on for more
than one minute. If the body overheats, unplug the unit and let it cool for two minutes.
8.- After completion of the process, remove the bottle by turning counterclockwise. Unscrew the
blade assembly and fit the cap provided with the package.
9.- Enjoy the mixture immediately or store it in the refrigerator.
1
5
38

OPERATION

2
6
3 4
7 8