TEFAL ClipsoMinut' Perfect Manual Del Usuario página 14

1
To switch on the timer: press the button.
2
Programme the cooking time (in minutes).
If you made a mistake with the cooking time, wait for
4 seconds until flames do not flash any more, then hold
the button down to reset.
3
Start with the heat source at maximum power.
4
As soon as your pressure cooker has reached the
cooking temperature, the timer rings and the
countdown begins (numbers flash).
Reduce the power of the heat source.
5
At the end of the cooking time, the timer rings.
To stop the timer ringing, press the button.
Turn off the heat source.
Fitting and removing the timer*
To fit the timer (F)
into the module and then press to clip the rear part.
To remove the timer (F), lift it using the tab and remove
it.
Changing the timer* battery
The timer battery is a CR2032 type.
If the symbol
a display, change the battery.
*depending on model
All manuals and user guides at all-guides.com
- Fig. 12, first insert the front part
appears, or if you no longer have
2
1
2
9
EN