In-Line Hydrophobic Filter (Accessory) - GMI PS500 Manual Del Usuario

USER HANDBOOK

4.2.3 In-line Hydrophobic Filter (Accessory)

The in-line hydrophobic filter assembly consists of a filter with a
luer fitting on one side and a slide-on connection on the other.
This is available as an accessory (Part No. 66485). The filter
assembly is used to protect the instrument from the ingress
of water when sampling in moist conditions.
The filter is located between two lengths of 'Tygon' tubing (Part
No. 66118) and attached to the instrument via a Sample Line
Connector (Part No. 66045) as illustrated in Fig. 4.5.
SAMPLE LINE
CONNECTOR
HYDROPHOBIC
FILTER
LUER FITTING
YELLOW LABEL
SLIDE-ON
CONNECTION
Fig. 4.5 In-line Hydrophobic Filter
4-6