Machine Inlet Valve Type Selection - IRTEC smart Manual De Instrucciones

12.5.

Machine inlet valve type selection.

The inlet type is selected through the selection wheel, and it is possible to choose between:

motorised inlet valve (figure 16),

motorised inlet valve and discharge valve (figure 17),

discharge valve (figure 18),

management of the motor pump on the machine (figure 19), in this case shutdown at the end of the
work cycle is controlled by means of the specific motor unit,

no water flow rate control device installed (figure 20).
52
96
98
100
97
99
20/01/2020
SMART