Before Assembly - Craftmade IM52 Instrucciones De Instalación

Read and Save These Safety Precautions
ectricity at main switch before wiring or servicing fan in order to avoid
ectrical shock.
must be in accordance with the National Electric Code (ANSI/NFPA 70-
local electrical codes. Electrical installation should be performed by a qualified
ectrician.
ng the wire connections, the wires should be spread apart with the grounded
and the equipment-grounding conductor on the one side of the outlet box
ngrounded conductor on the other side of the outlet box.
s after being made should be turned upward and pushed carefully up into
box.
r of a fan identified as grounded conductor to be connected to grounded
of power supply, conductor of a fan identified as ungrounded conductor to
ed to an ungrounded conductor of power supply, conductor of fan identified
ment grounding to be connected to an equipment-grounding conductor.
d not be mounted in an area where it might get wet.
the risk of fire, electric shock or personal injury, mount to outlet box marked
le for Fan Support" and use mounting screws provide with the outlet box.
and best operating results, we recommend that you have a qualified electrician
nd install your fan.
G: To reduce the risk of fire or electric shock, do not use this fan with any
speed control device.
the risk of personal injury, do not bend the blade brackets when installing
ts, balancing the blades or cleaning the fan. Do not insert foreign objects
n rotating fan blades.

Before Assembly

e that the fan voltage (120) is compatible with your own electrical system.
make sure that your carton contains all the parts mentioned in the parts list.
the motor is taken out of carton, please put it in a soft cloth to prevent any
ornamental surface.
efore installing, choose a location for mounting the fan where the blades have
f clearance from all objects and floor. Mount an outlet box to the ceiling or
box.
Do not mount fan to sheet rock or drywall type materials. To insure proper
he two #1 wood screws to secure mounting bracket to joist or beam. If the
hoose does not have a suitable support beam, install a 2"X4" brace between
support.
Tools You Need
er
)
3. Adjustable
Wrench
2. Flat
Screwdriver
All manuals and user guides at all-guides.com
Parts
1. Mounting Bracket
2. Down Rod Assembly
6" Rod Supplied
3. Canopy
4. Top Motor Housing
5. Fan Housing & Motor
6. Blades (included)
7. Light Kit Glass
8. Blank Cap
9. TCS Remote
10. Halogen Bulb
11. Balance Kit
Screw Package
S1. Wood Screws & Washers
S2. Screws (for Canopy)
S3. Bracket Screws & Washers
S4. Motor Screws
S5. Wire Connectors
S6. Safety Bolt & Nut
S7. "J" Hook
S8. Zip Tie
4. Wire Strippers
What You Have
Quantity
1
2
1
1
1
5
1
1
1
1
1
6
FAN OFF
L-1
HIGH
MED L-2
LOW REV
7 8
S1
Quantity
S2
2
3
2
S3
11
3
S4
1
1
1
S5
S6
1 2
3
4
5
9 10
S7 S8