Orbit b-hyve Guia De Inicio Rapido página 4

All manuals and user guides at all-guides.com
Timer Installation
Select a location
Choose a location near power and away
from direct sunlight, if possible . Make sure
to leave room for the timer door to open
completely .
This location should also have a good WiFi
signal . You can check this using a smart
Minimum Signal
phone . (Find a location that has a minimum
of two bars)
Note: If replacing a timer, it is helpful
to take a photo of the wires before you
remove them from the old timer .
Keyhole
1/8" (3mm)
Mount the timer
Install a screw (included) into the wall .
Use the expanding anchors (included) for
plaster, masonry or drywall installations .
No . 8 Screw
Hang the timer on the installed screw using
the keyhole slot . Level the timer and use
the second screw in one of the preformed
mounting holes to secure the timer .
Wall
Mounting Holes
4