Seagate ST3160026A-RK Guia De Inicio Rapido página 5

Requirements
Windows 98SE or later operating system with:
• a USB connector
or
• for a dual-interface kit, a Windows-certified,
OHCI-compliant IEEE 1394a controller
Microsoft maintains a list of Windows-certified
IEEE 1394a controller suppliers at
http://www.microsoft.com/windows/catalog/.
Click the Hardware tab, and then select Other
Hardware/1394 controller for the complete list.
Macintosh System 9.2.2 (or higher) or Mac OS X with:
• a USB connector
or
• for a dual-interface kit, an OHCI-compliant
FireWire connector
4
Quick Start Guide
Print Date:2005-May-10 12:38:44 MDT Released; Prod Rel; A; D0000115888 Seagate Confidential
All manuals and user guides at all-guides.com
Cautions
If your drive is turned on, don't move it.
You can safely move your drive when the power LED
is OFF. If the power LED is lit when you move your
drive, you risk excessive wear, reduced reliability, and
possible data loss.
Dual-interface kit: Use only one interface
at a time.
Do not simultaneously connect USB and the IEEE 1394a
(FireWire) cables to your drive. However, you can
connect two IEEE 1394a (FireWire) cables to your
drive at the same time to daisy-chain FireWire devices.