Product Overview; Controls - Toro 58630 Manual Del Operador

Product Overview

1. Engine-starter handle
2. Choke lever
3. Engine on/off switch

Controls

Become familiar with all the controls before you start
the engine and operate the machine.
Engine On/Off Switch
Use the engine On/Off switch to shut the engine off.
Ensure that the switch is in the O
starting the engine.
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting.
Operate the machine using full throttle for best
performance.
Choke Lever
Move the choke lever on the engine to the C
position when initially starting a cold engine, then
move it into the R position once started.
UN
Engine-Primer Bulb
Push the engine-primer bulb 3 times to prime the
engine before starting.
Figure 4
4. Throttle controls
5. Spark-plug wire
6. Fuel-tank cap
position before
N
HOKE
7
7. Engine primer
8. Output shaft
9. Air filter
Engine-Starter Handle
Pull the starter handle to start the engine.
g356798