CAB CL.FWS Manual De Instrucciones página 8

Declaration pursuant to Directives 2004/108/EC(EMC); 2006/95/EC(LVD)
Manufacturer: Automatismi CAB Srl.
Address: Via della Tecnica,10 (z.i.) - 36010 Velo d'Astico (VI) - Italia
Declares that the product: CL.FWS
is compliant with the conditions of the following EC Directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 15 2004
regarding the approximation of the legislations of the member States relative to electromagnetic compatibility and
that repeals directive 89/336/CEE, according to the following concurred norms:
EN 61000-6-2:2005, EN 61000-6-3:2007.
• DIRECTIVE 2006/95/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of December 12
2006 concerning the approximation of the legislations of the member States relative to electrical material destined
to be used within certain voltage limits, according to the following concurred regulations:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008; EN 60335-2-103:2003.
if applicable :
• DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9 1999
regarding radio devices and terminal and telecommunications devices and the reciprocal recognisances of their
conformity, according to the following concurred regulations: ETSI EN 301 489-3 V1.4.1 (2002) + ETSI EN 301
489-1 V1.4.1 (2002) + ETSI EN 300 220-3 V1.1.1 (2000) + EN 60950-1 (2001)
Benincà Luigi, Legal manager.
Velo d'Astico, 15/02/2010.
WARNINGS
This manual has been especially written to be use
by qualified fitters.
None of the information provide in this manual
can be considered as being of interest for the end
users.
Preserve this manual for future needs.
The technician has to furnish all the information
related to the step by step function, the manual
and the emergency function of the operator, and to
deliver the manual to the final user.
•
Foresee on the supply net an onnipolar switch
or selector with distance of the contacts equal
or superior to 3 mms.
Verify that of the electrical system there is an awry
differential interrupter and overcurrent protection.
Some typologies of installation require the connec-
tion of the shutter to be link at a conductive mass of
the ground according to the regulations in force.
The electrical installation and the operating logic must
comply with the regulations in force.
All manuals and user guides at all-guides.com
EC declaration of confirmity
The leads fed with different voltages must be physi-
cally separate, or they must be suitably insulated with
additional insulation of at least 1 mm.
The leads must be secured with an additional fixture
near the terminals.
During installation, maintenance and repair, interrupt
the power supply before opening the lid to access the
electrical parts
Check all the connections again before switching on
the power.
The unused N.C. inputs must be bridged.
The descriptions and the present illustrations in this ma-
nual are not binding. Leaving the essential characteristi-
cs of the product unchanged, the manufacturer reserves
himself the right to bring any change of technical, con-
structive or commercial character without undertaking
himself to update the present publication.