melitta CAFFEO SOLO&perfect milk Manual De Instrucciones página 76

Phase 1
During Phase 1, one bean symbol
→ First, two automatic rinsing processes are carried out.The standby symbol
will then be illuminated.
5 Reach into the recess on the right side of the appliance (Fig. A,
No. 12) and pull off the cover to the right.
6 Press and hold the red button on the handle of the brewing unit
(Fig. B, no. 1) and turn the handle clockwise to the stop (approximately
75°).
7 Use the handle to pull the brewing unit out of the appliance.
→ The standby symbol
alternately, as long as the brewing unit is out of the machine.
Caution!
Danger of damaging the brewing unit
During the cleaning programme, only remove the brewing unit when
–
instructed to do so.
8 Leave the brewing unit as it is (do not move or twist the components of
the brewing unit).
9 Thoroughly rinse off the entire brewing unit from all sides under running
water.
10 Let the brewing unit drip dry.
11 Place a cleaning tab in the brewing unit (Fig. C).
12 Reinsert the brewing unit into the appliance and turn the handle of the
brewing unit anticlockwise to the stop to lock.
→ Phase 1 is completed.
74
is shown on the display.
and the symbol for cleaning
will fl ash