Publicidad
Controls
For advanced configuration and control of
the KH 750 AES67 via a network we recommend
using the Neumann.Control iPad App.
Subwoofer Phase
Used to time align the subwoofer
and the loudspeakers. Set in steps
of 45 degrees.
Subwoofer Gain
INPUT GAIN and OUTPUT LEVEL:
Adjusts the output sound pressure
level of the subwoofer for a given
dBu input level.
Low Cut
Attenuates lower frequencies to
compensate for bumps in the
response caused by the room.
Input Ground Lift
Disconnects pin 1 of the analog
inputs to overcome audible
ground loops.
You will find a detailed instruction manual at: | Eine ausführliche Bedienungsanleitung finden Sie unter: | Vous trouverez une notice d'emploi détaillé sur : | Le istruzioni per l'uso dettagliate sono disponibili su: |
Encontrará unas instrucciones de manejo detalladas en: | Consulte o manual de instruções detalhado em: | Een uitvoerige gebruiksaanwijzing staat onder: | Szczegółowa instrukcja obsługi jest dostępna na: |
En utförlig bruksanvisning kan hämtas på: | Du kan finde en udførlig betjeningsvejledning på: | Yksityiskohtainen käyttöohje on saatavissa kohdasta: | Οι αναλυτικέ οδηγίε λειτουργία διατίθενται: |
Ayrıntılı bir kullanım kılavuzu için bkz: |
詳しい取扱説明書は以下でご覧ください ： | 상세 사용 설명서는 다음 주소에 있습니다.
www.neumann.com | KH 750 AES67
Audio Inputs & Outputs / Network Control
Digital AES3 In (BNC)
Digital AES3 Out (BNC)
Analog In (XLR-3F)
Digital AES67 Subwoofer In
Digital AES67 Loudspeaker In
Digital AES67 Primary
Digital AES67 Secondary
4th order, 24 dB/oct
Active Crossover
Digital AES67
Digital AES67
Bass Management
Disabling bass management
means the loudspeakers play
as if the subwoofer is not part
of the monitoring system (only
applicable for the analog and
AES3 outputs)
Network Control & Digital AES67 Primary (RJ-45)
Digital AES67 Secondary (RJ-45)
Analog Out (XLR-3M)
Input Select
ANALOG and AES3: The XLR and BNC
inputs are active (auto standby after 90 min),
priority on digital input
AES67: only the AES67 inputs are active
(no auto standby)
: | 获取详细的使用说明书请访问： | 若要取得詳細的使用說明書， 請造訪 ： |
Analog or Digital AES3 In
Analog Out
Digital AES3
Analog
Analog
Digital AES67 In
Analog Out
Digital AES67
Primary
Digital AES67
Secondary
Control Mode
LOCAL: Control via backplate
NETWORK: Control via Neumann.Control iPad App
Channel B Input Mode
Functionality of channel B input (Analog and AES3 only)
-> see pictograms for configuration details
4th order, 24 dB/oct
Active Crossover
Analog
Analog
4th order, 24 dB/oct
Active Crossover
Analog
Analog
Publicidad
