WIKA A-1200 Manual De Instrucciones página 23

9. Specifications
Specifications
Electrical connections
Plug connection
Short-circuit resistance
Reverse polarity protection
Insulation voltage
Overvoltage protection
Pin assignment
Materials
Wetted parts
Non-wetted parts
Case
Circular connector M12 x 1,
metallic
Circular connector M12 x 1
LED status display
System fill fluid
Options for specific media
Oil and grease free
Oxygen, oil and grease free
WIKA operating instructions, pressure sensor, model A-1200
All manuals and user guides at all-guides.com
Circular connector M12 x 1, metallic (4-pin), IP65 and IP67
Circular connector M12 x 1 (4-pin), IP65 and IP67
Angular connector DIN 175301-803 A (3-pin), IP65
The stated ingress protection (per IEC 60529) only applies when plugged in using mating
connectors that have the appropriate ingress protection.
SP1 / SP2 vs. U-
U vs. U-
+
DC 500 V
DC 36 V
see product label
Stainless steel
316L
316L
PBT GF30
PC
Synthetic oil for all gauge pressure measuring ranges < 10 bar [150 psi] and all absolute pressu-
re measuring ranges.
< 16 bar [250 psi] with increased overload safety
Residual hydrocarbon: < 1,000 mg/m²
Residual hydrocarbon: < 200 mg/m²
■
Packaging: Protection cap on the process connection, instrument sealed in a vacuum bag
■
Max. permissible temperature -20 ... +60 °C [-4 ... +140 °F]
■
Available measuring ranges:
■
0 ... 400 mbar to 0 ... 400 bar [0 ... 10 to 0 ... 5,000 psi]
-1 ... 0 to -1 ... 24 bar [-14.5 ... 0 to -14.5 ... 300 psi]
Factory supplied without sealing
■
Available process connections, see "Process connections"
■
EN
23