General Notes - Nedo SIRIUS 1 HV Manual De Instrucciones

General Notes

For your safety
Documentation
Please familiarise yourself with these operating instructions and the safety information
it contains before you start to work with the SIRIUS 1 HV. These are based on the
current EN 60825-1:2014 and IEC/TR 60825-1:2014 standards. Observing these
instructions and this information ensures safe working. The laser may only be used by
trained personnel!
Laser radiation
The SIRIUS 1 HV Rotating Laser is, depending on the version, a laser class 2 or laser
class 3R instrument, and conforms to EN 60825-1:2014
2
3R
General safety instructions for handling laser radiation:
Prevent direct eye exposure to the beam!
Do not direct the beam at other people or into public areas!
To prevent reflections, do not point the laser at reflective surfaces.
If possible, do not operate the laser at eye level!
The housing of the laser may be opened by trained service technicians only!
The emitted laser radiation has the following properties:
- Power P 1mW / Power P 5mW
- Wavelength : 630-680 nm
- Beam divergence
- Stationary laser dot: CW laser
- Rotating laser dot: Laser pulse with f: 1Hz ... 10Hz
Warning signs
Never remove the warning signs on the unit.
For users in Germany:
Please note and following the guidelines of the professional/trade association with liability for
industrial safety and insurance (Berufsgenossenschaftliche Richtlinie) BGI832 on the operation
of laser equipment: It is recommended that operation of a class 3R laser be registered with the
responsible professional/trade association (Berufsgenossenschaft) (BGI 832, Section 2.5).
Operating Instructions SIRIUS 1 HV Rotating Laser
All manuals and user guides at all-guides.com
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
LASER RADIATION
AVOID DIRECT EYE EXPOSURE!
CLASS 3R LASER PRODUCT
1.5 mrad
EN 60825-1:2014
P 1mW
: 630-680 nm
1,5 mrad
EN 60825-1:2014
P 5mW
: 630-680 nm
1,5 mrad
ATTENTION
EN
9