All manuals and user guides at all-guides.com
Fax +32 2 359 95 50
USE
•
Protective coating burn off will cause smoking on first use. This is NOT harmful.
•
When using for the first time, wipe the surface of the plates with a damp cloth, then dry.
•
To remove the baking plates, press the release buttons, and take out the baking plates.
•
Place the desired plates in the appliance by inserting the plate locking tabs in the plate
locking openings and press on the plates till you hear a click. You may season the plates
with butter, margarine or cooking fat. Since the appliance has a non-stick coated surface,
the use of butter or oil is optional.
•
Close the sandwich maker and plug into the electrical outlet. The red pilot light will come
on to indicate that the appliance is switched on.
•
The green pilot light will come on as well when the cooking temperature is reached.
During use, this ready light will come on and off regularly. This simply means that the
thermostat is regulating the appliance's temperature.
•
Attention: during the functioning, the baking plates heat up. Pay attention not to get
burned.
!! TO AVOID BURNS, WAIT UNTIL THE APPLIANCE HAS TOTALLY COOLED DOWN BEFORE
CHANGING THE PLATES.
Sandwich function
•
Prepare your sandwich while the unit is heating.
•
Fully open the sandwich maker. Place a slice of bread in the bottom half with the
buttered side against the plate.
•
Fill the sandwich.
•
Add the top slice with the buttered side up and carefully close the appliance. Do not
force shut. Steam will be ejected from between the plates; make sure that fingers do not
come into contact with it.
•
Lock the two halves with the wire clip while toasting.
•
Your sandwich will be toasted in 2 to 3 minutes or longer to suit your taste. Open the
appliance and remove sandwich using a plastic or wooden spatula. Never use a metal
knife as this may damage the non-stick coating.
•
Close the lid to preserve the heat until you are ready to toast the next sandwiches.
•
Prepare additional sandwiches if desired while the others are cooking.
•
Unplug when finished.
Grill function
•
Lightly brush grids with butter, margarine or cooking oil to avoid that the foods stick to the
plates.
•
When the appliance has reached the desired temperature, open it and put the foods in
on the grill plate. Make sure the foods are not too thick, so that you can close the
appliance. The cooking time depends on the type of food you are grilling. To avoid
burning the foods, check regularly during the cooking process.
•
When grilling is finished, unplug the appliance and leave it open to allow it to cool down.
Copies of the I/B. Please reproduce them without any
changes
except
under
special
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
9
Assembly page 9/40
instruction
from
Team
VG SWM 1 - 101217