Programmed Play - Clatronic SR 7028 BT/CD Manual De Instrucciones

IMPORTANT NOTE:
Playing of CDs and CDRs in MP3 format!
The unit cannot play MP3s. The CD will rotate, but the
sound cannot be reproduced.
5. In order to remove a CD, please press the / PAIR
button (13), open the CD compartment and lift the CD
out carefully.
Always keep the CD deck closed.
NOTE:
• If a disc is incorrectly inserted - or no disc has been in-
serted - the symbol " " and the word "
in the display.
• Please observe:
Many burning methods exist, as well as quality differ-
ences with CDs and burned CDs.
In addition, the music industry does not observe fixed
standards (copy protection).
Because of this, in rare cases there may be problems
with playback of CDs. This is not a malfunction of the
device.
Description of the Control Buttons
NOTE:
Not all the functions may be supported depending on the
playback device.
/BT (14)
You can briefly interrupt and resume playback using this
button. Pressing again continues playback.
(6)
With the button you can jump to the next or previous
track etc. If the button is kept pressed down, the machine
starts to search through the tracks.
(7)
The button can be used as follows:
Press once = This starts the current track again
from the beginning.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc.
If the button is kept pressed down, the machine starts to
search through the tracks.
/PAIR (14)
• The CD stops.
• To disconnect an existing Bluetooth connection, keep the
/PAIR button pressed down. The
flashing in the display.
26
SR7028BT_CD_IM
PROG / MEMORY (11)
• In stop mode for programming any order of tracks (see
the section "Programmed Play").
• In radio mode for storing radio stations (see the section
"Listening to the Radio").
MODE (12)
When playing an audio CD:
Press once
Press twice
" appear
Press three times = (
Press four times = All functions are cancelled. The nor-
This can be used to program any desired sequence of
tracks. (Only in CD mode)
1. Press the /PAIR button (14).
2. Press the PROG / MEMORY button (11).
location) appears on the display and
display. Use the
sired track and then press the PROG / MEMORY button
again. The display changes to preset location
3. Select the next track with the
the PROG / MEMORY button again. Repeat the proce-
dure until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be
programmed has been reached
display.
4. Press the
notification
5. Press once the /PAIR button to stop the playback while
retaining the program.
6. To play the programme back again, press the
button.
The device stops automatically after all programmed titles
have been played. The listed sequence remains in the
memory until you switch to a different operating mode.
Deleting a Programmed Sequence
To delete the program, press the /PAIR button twice. The
notification
indicator starts
= (The symbol flashes) the current
track is repeated continuously.
= (The symbol is lit) the whole CD
is played continuously.
appears in the display) all titles
are replayed successively in random
order.
mal play mode is resumed.

Programmed Play

flashes on the
/ buttons (6 / 7) to select the de-
/ buttons and press
flashes in the
/BT button (14). The playback starts. The
will appear additionally in the display.
will disappear.
14.09.18
(preset
.
/BT