Publicidad
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Phillips Screwdriver, Tape Measure, Hammer, Wood Glue.
NOTE: Due to the fact that more than one type of hardwood is used, we recommend testing for desired
color.
To test for desired color on:
a) Veneer parts – apply stain to unexposed portion of side panel. See FIGURE 1.
b) Alder pieces – apply stain to back of top/bottom apron. See FIGURE 6.
Door Panels are removable from Door Frames for fi nishing.
N
N
N
N
N
N
N
N
N
C
B
D
1) Insert Cam Connectors (N):
• three in Right Front Leg (B)
• three in Right Back Leg (C)
• three in Left Front Leg (D)
• three in Left Back Leg (E)
• four in Top (F)
• two in each Side Panel (AL & AR). Bottom edge of side panels are stamped "L" for left and "R"
for right.
Glue two Wood Dowels (Q) in each end of both Top/Bottom Aprons (G).
READ CAM-LOCK INSTRUCTIONS
PAGE 4 — 277W
277W Stafford Sideboard
N
AL/AR
N
N
F
N
N
E
FIG. 1
IMPORTANT:
The side panels have a compression
stamp on the bottom edge:
"L" for left, "R" for right.
STAIN TEST AREA
N
N
G
N
N
Q
Q
Publicidad
