Tommee Tippee closer to nature perfect prep machine Manual De Instrucciones página 4

How to set up and clean the Perfect Prep machine
4
Before first use you need to run a cleaning cycle – which should take approximately 10 minutes. For hygiene and safety reasons you should clean your unit on a regular basis.
We recommend you carry out this cleaning cycle every 14 days and whenever you replace your filter or if the machine has been unused for a period of 7 days.
THE FILTER SHOULD NOT BE FITTED PRIOR TO FIRST USE CLEANING.
Place a container under the
dispenser outlet to capture the
water used to clean the system
(ideally at least 1 litre capacity).
Press the cleaning mode button
and hold for 2 seconds.
The cleaning mode light will
illuminate.
Plug in the unit, the water level
low warning light will illuminate.
Wait whilst the boiled water is
emptied from the tank, through
the dispenser outlet, into the
container that you placed under
the outlet in step 1.
With the water hopper in place
(but not the filter) fill the hopper
with 1 litre of freshly boiled water
- HOT WATER -
The water level low warning
light will illuminate once the
water has flushed through
the system.
Wait for the water level low
warning light to go out.
The water tank hot light will
illuminate.
Discard the water captured
in the container and replace
it back under the dispenser
outlet.