Tommee Tippee closer to nature perfect prep machine Manual De Instrucciones página 5

Priming your filter before use:
(Handle the filter by the top only)
• Remove the filter from the packaging.
• Remove sticker from the top of the filter.
• Fill a bowl with cold tap water.
• Fully submerge the filter in the water.
• Gently agitate the filter until the
bubbles cease.
Press the start / stop button.
A red light will flash.
Remove the water hopper
and fit the filter.
Replace in the water tank.
The appliance will dispense an
amount of cold water.
Fill the hopper with
COLD WATER.
Press the start/stop button.
A green light will flash and
water will be dispensed to
finish the cycle. The contents
should be discarded.
Wait for the water level low
warning light to go out.
Press the filter volume reset button
for 2 seconds to clear the memory.
Discard dispensed water.
YOUR SYSTEM IS NOW
READY TO USE.
5