Changing Channels - Topcom Twintalker 3700 DUO PACK Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35
13
USING THE TWINTALKER 3700
13.1 TURNING THE UNIT ON/OFF
To activate; press and hold
To switch off; press and hold
13.2 ADJUSTING SPEAKER VOLUME
The Speaker Volume can be adjusted using
LCD.
13.3 RECEIVING A SIGNAL
The unit is continuously in the RECEIVE mode when the unit is ON and not transmitting. When you receive
a signal on the current channel, the RX icon is displayed.
13.4 TRANSMITTING A SIGNAL
• Press and hold
• Hold the unit in a vertical position with the MICROPHONE 10 cm from the mouth and speak into the
microphone.
• Release
PTT

13.5 CHANGING CHANNELS

The PMR has 8 available channels.
To change channels:
• Press
once, the current channel number flashes on the LCD Screen.
• Press
or
• Press
PTT
• To confirm and shift to the next option, press
NOTE: Any PMR set on the same channel can receive and listen to the conversation, also when the other use a CTCSS
code.
13.6 CTCSS (CONTINUOUS TONE CODED SQUELCH SYSTEM)
The 2 digit CTCSS code corresponds to a specific tone frequency the radio emits. Two users, with the same channel
and CTCSS set can hear one another.They will not be able to hear anyone else on the channel unless the other radios
have the same exact CTCSS code enabled.
The PMR has 38 CTCSS codes available.
• Press
twice, the CTCSS code will flash
• Press
or
• Press
PTT
• To confirm and shift to the next option, press
NOTE: Any PMR set on the same channel can receive and listen to the conversation, also when the other use a CTCSS
code.
TOPCOM TWINTALKER 3700
All manuals and user guides at all-guides.com
. The unit will "beep" and the LCD Screen will display the current channel.
again. The unit will "beep" and the LCD Screen will turn blank.
In order for other people to receive your transmission, they must be set
on the same channel and CTCSS code
to TRANSMIT.
PTT
when you have finished transmitting.
to change the channel.
to confirm your selection and return to the NORMAL mode.
to select another code.
to confirm your selection and return to the NORMAL mode.
and
. The Speaker Volume level is displayed on the
.
.
TOPCOM TWINTALKER 3700
5

Publicidad

Tabla de contenido
loading

Tabla de contenido