Stiga SH 500 Li 48 Serie Manual De Instrucciones página 101

equipment such as a dust mask, non-skid
safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source, picking up
or carrying the tool. Carrying power tools
with your finger on the switch or energising
power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the machine may result in personal
injury.
e) Do not overreach.
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose
clothes, jewellery or long hair can be caught
in moving parts.
g) If devices
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
h) Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of a
second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer at the speed for which it was
designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery
pack, if detachable, from the power
tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the machine.
Keep
are provided for
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
proper instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces
do not allow for safe handling and control
the of the tool in unexpected situations.
i) Do not use the machine if the key
switch is not able to start it or stop
it regularly. A machine that cannot be
operated by the key switch is dangerous
and must be repaired at a service centre.
j) Remove the ignition key before making
any adjustments, changing accessories
or
preventive safety measures reduce the
risk of starting the power tool accidentally.
5 Battery tool use and care
a) Recharge
specified by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fire, electric shock,
overheating or corrosive liquid to leak
from the battery. when used with another
battery pack.
b) Use
specifically designated battery packs.
Use of any other battery packs may create
a risk of injury and fire.
c) When the battery pack is not in use,
keep it away from other metal objects
such as paper clips, coins, keys, nails,
screws or other small metal objects
that may create a connection from one
terminal to another. Shorting the battery
terminals together can cause burns or a
fire.
d) Under abusive conditions, liquid may
be ejected from the battery: avoid
EN - 3
storing the power
only with
power tools exclusively
tool. Such
the charger
with