Before Using; Inserting / Changing The Battery - Powerfix Profi HG03064B Instrucciones De Utilización Y De Seguridad

Clean the contacts on the battery / recharge-
able battery and in the battery compartment
before inserting!
Remove exhausted batteries / rechargeable
batteries from the product immediately.

Before using


 
B efore initial use, remove the protective film
from the product display
enclosed battery.
Inserting / changing
 
the battery
If the battery symbol
display, the inserted battery is almost drained
and must be replaced. Empty batteries can falsify
the measured result.
To insert the battery proceed as follows:
 
O pen the battery compartment cover
the back of the product. You can remove the
used battery more easily with the aid of the
material strip, which is inside the battery com-
partment
 
R emove the used battery.
 
P lug the contacts of the 9 V block battery on
the contacts of the profiled plug. Make sure
you fit the batteries the right way round. This
is specified by the profiled shape of the con-
tacts. Also ensure without fail that the material
strip is underneath the battery.
12
. Just pull on the material strip.
8
and insert the
2
appears in the
GB/IE
on
9
23