Powerfix Profi HG03064B Instrucciones De Utilización Y De Seguridad página 27

not a metal beam (or for example a water pipe),
use the additional Metal search "METAL".
 
D epending on the wall thickness and mate-
rial, it is possible that the product may signal
a finding, before it is over the material. In this
case mark the start and end of the signalled
area at the indentation of the measuring
head. The middle of the sought object lies in
the middle between the two markings.
 
P lease note that metal objects are located more
readily the easier they can be magnetized.
This means that iron is detected at a significantly
greater distance than copper for example.
 
P lease note that power lines can only be
detected as such, if they are carrying voltage.
Light switches must always therefore be switched
on, so that the conductor is carrying voltage.
All the fuses must similarly be inserted or
switched on.
 
P lease note that only voltages of 230 V ~
50 Hz are detected.
 
I f the display of the product hang-up or the
product doesn't work well, open the battery
cover, move the battery out of battery com-
partment, press the RESET button using a
sharp object. Then the product display will
restart and resume to normal.
Note: Do not disconnect the battery while
using RESET button.
GB/IE 27