Cameo CLQS40TW Manual De Usuario página 7

ENTER
Menu
Mode
UP/DOWN
SYSTEM SETTINGS (settings)
To access system settings, press the MODE button repeatedly until "Menu DMX Addr" or "Menu Mode" appears in the display. Now select
the menu item "Menu Settings" using the UP and DOWN keys and press ENTER. Now select the desired submenu item, but this time with
the buttons UP and DOWN and confirm with ENTER (see tables, note submenus).
Settings
Display Rev = rotate display by 180°
Display = automatic display shutdown
DMXFail = operating status with DMX
signal fault
Dim.Curve = dimmer curve
Dimmer Resp. = dimmer sensitivity
White Balance = white balance
ENTER
Mode DMX mode
DMX
UP/DOWN
DMX mode
03CH2
/
Mode ENTER Mic Sens
Sound
UP/DOWN
ENTER
/
Mode
ENTER
Slave
/
Mode ENTER
Static
UP/DOWN
ENTER - UP/DOWN
Display Rev On
Display Rev On
Display On
Display Off
Hold
Blackout
Linear
Exp
Log
S-Curve
LED
Halogen
cool white
warm white
DMX mode
/
01CH 02CH
DMX mode
/
08CH
00-99
Static Static
-
Dimmer CT
ENTER - UP/DOWN
CT
Dimmer
000-255
000-255
(cool-warm)
ENTER
ENTER
= rotate display by 180° (e.g. for overhead installation)
= normal orientation of the display
= permanently on
= automatic display shutdown after approximately 1 minute
of inactivity
= last command is retained
= activates blackout
= light intensity increases linearly with DMX value
= light intensity can be finely adjusted at lower DMX values
and broadly adjusted at higher DMX values
= light intensity can be broadly adjusted at lower DMX values
and finely adjusted at higher DMX values
= light intensity can be finely adjusted at lower and higher
DMX values and broadly adjusted at medium DMX values
= spotlight responds abruptly to changes in DMX value
= spotlight behaves like a halogen spotlight with soft
brightness changes
= individual white balance. Cross-mode configuration of the
2 cool white and warm white LEDs
DMX mode
/
/
03CH1
ENTER
7