Safety Signs; Product Identification Label - Stiga BC 625 Serie Manual De Instrucciones

3.2 SAFETY SIGNS

The machine has various symbols on it (fig. 2).
Their function is to remind the operator of the
correct conduct for use, with due care and caution.
Meanings of the symbols:
WARNING! DANGER! The failure
to use this machine correctly can be
hazardous for oneself and others.
WARNING! Read the owner's
manual before using the machine.
Anyone operating the machine
under normal conditions for
continuous daily use may be
exposed to a noise level equal
to or exceeding 85 dB (A).
Use ear protection devices,
goggles and helmet.
Wear protective gloves
and safety footwear!
PROJECTION HAZARD! People
or pets must be kept at least 15 m
away when using the machine!
Maximum speed of the
cutting means.
Do not use circular saw blades.
Danger: Using circular saw
blades on models that are not
designed for them exposes
the user to the risk of very
serious or even fatal injuries.
WARNING! Petrol is flammable.
Allow the engine to cool at least
2 minutes before refuelling.
Beware of blade kickback.
WARNING! - Keep away
from hot surfaces.
IMPORTANT Any damaged or illegible decals
must be replaced. Order replacement decals from
an Authorised Service Centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label provides the
following data (Fig. 1):
1. Sound power level
2. Conformity marking
3. Month / Year of manufacture
4. Type of machine
5. Serial number
6. Name and address of Manufacturer
7. Article code
Write the identification data of the machine in the
specific space on the label on the back of the
cover page.
IMPORTANT Quote the information on the
product identification label whenever you contact
an Authorised Service Centre.
IMPORTANT An example of the Declaration of
Conformity is provided on the last pages of this
manual.
3.4 MAIN COMPONENTS
The machine is composed of a series of main
components that have the following functions
(Fig.1 ):
A. Engine: drives the cutting means via drive
tube and angle transmission.
B. Transmission tube: The tube houses the
drive shaft which transmits rotary motion to
the angle transmission.
1. Rigid transmission tube
2. Flexible transmission tube
C. Angle transmission: final part of the
transmission tube that transmits motion to the
cutting means.
EN - 5