Assembly - Attaching The Fan Blades; Attaching The Blades To The Blade Arms On Motor Assembly - Home Decorators Collection 52154 Guía De Uso Y Cuidado

Assembly - Hanging the Fan (continued)
7
Mounting the fan-motor assembly
(standard mount)
WARNING: When using the standard ball/downrod
mounting, the tab in the ring at the bottom of the
mounting bracket must rest in the groove of the hanger
ball. Failure to properly seat the tab in the groove could
cause damage to the wiring.
NOTE: The magnet is pre-attached on the canopy bottom
cover for you to remove and install easily.
□
Align the locking slots of the canopy (C) with the two screws (HH)
and alignment post (KK) in the mounting bracket (A).
□
Push up the canopy (C) and turn clockwise until the alignment
post (KK) engage to the round hole and the screws (HH) engage
to the key slots.
□
Firmly tighten the two mounting screws (HH).
□
Align the oval shape on the canopy (C) with canopy bottom cover
(JJ), Push up the canopy bottom cover (JJ) until the screw (HH)
heads engage to the slots on the canopy bottom cover (JJ) so
that the magnetic canopy bottom cover (JJ) can be attached to
the bottom of the canopy (C) properly.

Assembly - Attaching the Fan Blades

1
Attaching the blades to the blade
arms on motor assembly
□
Attach a blade (G) to the blade arm on motor assembly by
aligning the holes on the blade support plate (H) with the
holes on blades (G) and blade arms , inserting the screws
(AA) into the holes in the blade support plate (H) and
through the blade (G) and blade arm.
□
Tighten each screw to secure the blade (G).
□
Repeat this step for each blade (G) and blade arm on mo-
tor assembly.
KK
11
Please contact 1-800-986-3460 for further assistance.
I
AA
H
G
E
HOMEDEPOT.COM/HOMEDECORATORS
A
HH
C
B
JJ
D