Tripp-Lite DWF1323M Manual Del Usuario página 4

1. Separate VESA Plate
2a. Mount on Wood Stud Wall
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
13-03-119-933293-EN.indd 4
All manuals and user guides at all-guides.com
Anchor Bolt
WARNING
4
Use a screwdriver to loosen
the bottom screws in order to
separate the VESA plate from
the wall mount.
1
2
Find and mark the
exact location of
mounting holes
3
Drill pilot holes
Screw the wall
mount onto
the wall
4/25/2013 2:42:52 PM