Bosch BSGL5225GB Instrucciones De Uso página 5

The appliance may be used by children
over the age of 8 years and by persons
with reduced phy-sical, sensory or
mental capacity or by persons with a
lack of experience or knowledge if they
are supervised or have been instructed
on the safe use of the appliance and the
have under-stood the potential dangers
of using the appli-ance.
Children must never play with the
appliance
Cleaning and user maintenance must
never be carried out by children without
supervision.
Information regarding disposal
Packaging
The packaging protects the turbo brush from becoming
damaged during transportation. It is made of
environmentally friendly materials and can therefore be
recycled. Dispose of any unwanted packaging materials
at the collection point for the recycling system "Green
Point".
Second-hand appliances
Second-hand appliances still contain many valuable
materials. Therefore, give your second-hand appliance to
your dealer or to a recycling centre to be recycled.
Ask your dealer or your local government about the current
methods of disposal and the location of recycling centres in
your area.
Please fold out the picture page!
Starting up
Illustration 1
a) Fit the turbo brush onto the suction pipe.
b) Push the telescopic pipe into the supports of the turbo
brush until it audibly engages. Press the unlocking
sleeve and pull out the telescopic pipe to remove it.
(Equipment will vary with each model).
4
All manuals and user guides at all-guides.com
Vacuuming with the brush
!
Illustration 2
Illustration 3
Maintenance
Always switch off the vacuum cleaner and pull out the plug
before performing any maintenance work. Remove the
turbo brush from the suction / telescopic pipe.
Illustration 4
Illustration 5
Illustration 6
a) Closed chamber.
b) Open chamber
c) Insert the front lips to reassembly the lower cover
d) Push the cover up to click.
!
Subject to technical change without notice.
Please observe!
Only vacuum using the brush on full suction power, i.e.
max. performance of the vacuum cleaner.
The turbo brush has the possibility to change the rotation
speed of the brush from a maximum »A« to a complete
stop »B«
Moving the slider a little from »A« to »B« permits an
optimum cleaning effect for the different floor coverings
(long or short pile carpets).
Closing completely the fan inlet (position »B«)it is
possible to use the device as a normal floor nozzle.
Only brush the fringes in the direction of the arrow.
Cut off any wrapped around hair or threads using a pair
of scissors.
Then vacuum up the threads and hair using the corner
nozzle.
The lower cover can be removed for cleaning the fan and
the fan chamber.
To remove the cover act to the two little side wings
pushing them toward you, lift up with a light rotation.
Please observe!
Never operate the turbo brush without the lower cover or
with the lower cover not well locked.