Statement 2017-Class A Notice For Fcc; Statement 2021-Class A Notice For Canada; Statement6005 Californiaperchloratecontamination Prevention Act; Statement 7001-Esd Mitigation - Cisco NCS 560 Serie Manual Del Usuario

Regulatory Compliance and Safety Information Regulatory Compliance and Safety Information Cisco NCS 560 Series Routers
Statement 2017 Class A Notice for FCC
Modifying the equipment without Cisco's authorization may result in the equipment no longer complying
with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be
limited by FCC regulations, and you may be required to correct any interference to radio or television
communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case users are required to correct the interference at their own
expense.
Statement 2021 Class A Notice for Canada
This Class A digital apparatus complies with Canadian ICES-003.
Statement6005 CaliforniaPerchlorateContamination
Prevention Act
The battery inside this product might contain perchlorate, a known hazardous substance, so special handling
and disposal of this product might be necessary. For more information about perchlorate and best management
practices for perchlorate-containing substances, see
http://www.dtsc.ca.gov/HazardousWaste/Perchlorate/index.cfm.
Statement 7001 ESD Mitigation
This equipment may be ESD sensitive. Always use an ESD ankle or wrist strap before handling equipment.
Connect the equipment end of the ESD strap to an unfinished surface of the equipment chassis or to the ESD
jack on the equipment if provided.
Statement 7002 Intrabuilding Lightning Surge
(Shielded Cables)
Shielded (screened) cables utilized for connection to intrabuilding telecommunication ports shall be grounded
at both ends of the cable.
Regulatory Compliance and Safety Information - Regulatory Compliance and Safety Information Cisco NCS 560 Series
Routers
15