Publicidad
Idiomas disponibles
Idiomas disponibles
COMMISSIONING AND OPERATION
Getting Started
1. The socket must be earthed.
2. Lay out the drain hose so that the water can drain off easily.
3. Plug the power plug into the mains socket.
4. Connect the water supply: Insert the hose into the opening provided until
you hear a click.
Overview washing process
1
Washing
Caution: If the water level is too high, the water will spill out of the drum.
To avoid deformation of clothes, fold them and close zips (e.g. on trousers).
Prepare the clothes as shown in the picture. All pockets must be emptied.
Remove coins, nails, etc. Fur trim or other ornaments must be pulled inside
out. Bold colours should be washed individually.
Washing
1. Fill with water: Fill with water to the desired level.
2. Add detergent and select the washing time.
3. Load laundry: Load the laundry. Decrease the amount of water if
necessary.
4. Adjust the water flow: Adjust the water flow appropriately. Drain the
water after washing.
5. Disconnect the unit from the mains. Observe the safety instructions when
doing so. After you have drained the water from the washing drum, set the
control from "Pump out" back to "Standard".
2
Pump out half
3
Rinsing
EN
13
Publicidad
