Setup; Menu Basics; Navigation Buttons; Main Menu - Rotel RSP-1582 Manual De Instrucciones

Setup

The Rotel RSP-1582 features two types of information displays to help operate
the system. The first consists of simple status displays that appear on the
TV screen whenever primary settings (Volume, Input, etc.) are changed.
A more comprehensive ON-SCREEN DISPLAY (OSD) menu system is
available at any time by pressing the SETUP
7
the MENU button on the front panel. These OSD menus guide you
through the configuration and setup of the RSP-1582. The settings made in
the configuration process are memorized as default settings and need not
be made again for normal operation of the unit.
The OSD menus can be configured to display several different languages.
The default English version of all main menus are shown at the front of this
manual. If your language is available, those menus will be shown in the
instructions. If you would like to change from the default English language
before proceeding, go to the instructions for the SYSTEM SETUP menu later
in this manual. From this menu, you can change the language display.

Menu Basics

Navigation Buttons

The following remote control buttons are used to navigate the OSD menu
system:
SETUP button: Press to display the MAIN MENU. If a menu is already
visible, push this button to close the OSD and return to normal operation.
Up/Down buttons: Press to move up and down in the lists of menu items
that appear on the OSD screens.
Left/Right buttons: Press to change the current settings for a selected menu
item on OSD screens.
ENTER button: Press ENTER to confirm a setting.
BACK Button: Press BACK to go back to the previous menu.

Main Menu

SPEAKER CONFIGURATION
SPEAKER DISTANCE SETUP
SUBWOOFER SETUP
SPEAKER LEVEL SETUP
PEQ CONFIGURATION
H button on the remote or
MAIN MENU

INPUT SETUP

VIDEO SETUP
SYSTEM SETUP
EXIT
The MAIN MENU provides access to OSD screens for various configuration
options. MAIN MENU is reached by pressing the SETUP
7
remote, or the MENU button
menu, move the highlight using the Up/Down arrow buttons on the remote
control or front panel and press the ENTER button on the remote control or
front panel. Press the SETUP/MENU button again or select "EXIT" on the
OSD to end setup and return to normal operation.
Configuring Inputs
A key step in setting up the unit, is to configure each source input using the
INPUT SETUP screens. Configuring the inputs allows you to set defaults for a
number of settings including the type of input connector, the desired surround
mode, custom labels that appear in the displays when a source is selected,
and many more. The following OSD menus are used to configure the inputs.
Input Setup
VIDEO INPUT : HDMI1
AUDIO INPUT : USB Audio 2.0
TRIGGER OUTPUT : 1 _ _
DEFAULT MODE : Source Dependent
AUDIO DELAY : 0m sec
LEVEL ADJUST : 0dB
The INPUT SETUP menu configures the source inputs and is accessed from
the MAIN menu. The screen provides the following options, selected by
placing the highlight on the desired line using the Up/Down arrow buttons:
SOURCE: Changing this input allows you to select a specific input for
configuring (CD, TUNER, VIDEO 1–8, USB, PC-USB, XLR, PHONO & MULTI
INPUT, BLUETOOTH).
NAME: The name of the source can be customized. For example VIDEO1
can be named "TV" for easier reference. The default NAME is the same
as the SOURCE. Place the highlight on this option and press ENTER on the
remote control or front panel, it will then take you to the SOURCE NAME
EDIT sub menu.
1. Press the Left/Right arrow buttons on the remote control or front panel to
change the first letter, scrolling through the list of available characters.
2. Press the ENTER button on the remote control or front panel to confirm
that letter and move to the next position.
3. Repeat steps 1 and 2 until all eight characters have been completed.
The final press of the ENTER button saves the new label. Or select
8
the " " button on the screen to confirm if you have less than eight
characters to enter.
VIDEO INPUT: Selects the video source to be displayed on the TV monitor.
Assign the input to a source component you have connected by selecting
from HDMI 1–7 and HDMI Front. For audio only sources (such as a CD
player), you would typically specify OFF so that no video is displayed. The
video source can also be set to "LAST Video Source" so when switching to
the specified Video input the previous Video source is not changed. This
feature is useful if you want to change only the audio and keep watching
whatever was the last displayed video source.
H
on the front panel. To go to the desired
INPUT SETUP
SOURCE : PC-USB
NAME : PC-USB
BACK
23
button on the