Important Warnings - Tommee Tippee 1150 Instrucciones De Uso

IMPORTANT WARNINGS!

These instructions can also be found at www.tommeetippee.com
Keep this instruction sheet for future reference as it includes important
information.
This appliance is intended for household use only. Do not use outdoors. Before plugging
in the food and bottle warmer for the first time ensure that the voltage is compatible with
your electricity supply by checking the label on the base of the unit. Ensure water has been
added to the unit before switching the unit on. Do not immerse in water. To protect against
fire, electric shock and injury to persons do not immerse cord, plugs or other parts of the
unit in water or other liquid. Misuse of the product may result in the risk of fire, electric
shock and/or personal injury. This appliance can be used by persons aged 14 years and
above if they have been given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Cleaning and user maintenance shall not
be made by children unless they are aged 14 years and above and supervised. Keep this
appliance and it's cord out of the reach of children. This appliance is not intended for use
by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety. Children do
not understand the dangers associated with operating electrical appliances. Never allow
children to use this appliance. The heating element surface is subject to residual heat
after use. Do not touch hot surfaces use handles and knobs. Ensure that the heating
guidelines are followed to ensure that the food is not heated for too long. For your child's
safety – Always check food temperature before feeding by testing on a sensitive part of
your skin. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner. If the supply cord is damaged it must
be changed by a qualified person in order to avoid a hazard. Always use on a dry flat heat
resistant kitchen surface. Do not move appliance when in use. Do not let the cord hang
over edge of kitchen work surface or touch hot surfaces. The product has been fitted with
a cord wind on the base of the unit to allow you to adjust the length of the cord safely. It
is recommended that the cord be kept as short as possible. Do not use any accessories
other than those supplied with this appliance. The cord must exit the cable tidy using the
exit recess. If the cord is correctly placed in the tidy the product will sit level. Do not start
using the product if it is not sitting level. Regularly check the cord and plug for signs of
damage, if visible remove from use immediately. The water inside the unit gets very
hot and can cause burns, please take care when removing items from the food and
bottle warmer. The unit remains on unless it is switched off at the mains.
EN
USAGE
The speed at which the food and bottle warmer heats the milk or food will depend on the size of the bottle or container and the starting temperature of the
milk or food (e.g. room temperature 20˚C or from the refridgerator 5˚C). We recommend that setting
only. Setting is a MIN setting and should not be used.
MILK OR FOOD SHOULD NOT BE HEATED FOR OVER 30 MINUTES.
The guide gives an indication of the time you can expect the warmer to take. Maximum average stabilised temperature is approximately 85˚C
FOR FEEDING BOTTLES
1. Place filled bottle in the food and bottle warmer.
2. Fill the food and bottle warmer with water to the inside edge using a jug or bottle (unless using a 150ml bottle). For a smaller bottle fill to the underside of the screw ring.
Never let the water overflow or rise above the neck of the bottle.
3. Before plugging in, make sure the food and bottle warmer is switched to the setting. Ensure your hands are dry.
4. Plug in the unit to the mains and switch the mains on.
5. Turn dial to setting . The amber light will turn on to indicate the food and bottle warmer is switched on and is heating up.
6. Once the water is heated, the amber light will switch off to indicate that the thermostat will maintain the temperature of the water. It does not indicate that the milk is ready.
Please refer to the timings table in this manual to find out how long the milk should be heated for.
7. Heat the milk to the desired temperature. Ensure that the heating guidelines are followed to ensure that the milk is not heated for too long.
8. Take care when removing the bottle, as it and the surrounding water will be hot.
9. For your child's safety always check milk temperature before feeding by testing on a sensitive part of your skin. Take care not to overheat the milk. Gently agitate the
bottle prior to feeding.
10. During feeds the bottle can be placed back in the warmer to keep milk warm by using setting
the indicator light will switch to amber to indicate the warmer is heating up.
11. Turn back the dial to setting and unplug the unit after feeding.
12. Empty the unit of any water and wipe dry.
FOR BABY JARS
1. Remove the lid and place jar in the food and bottle warmer.
2. Fill the food and bottle warmer with water to the inside edge using a jug or bottle. Ensure the water level is lower than the rim of the jar.
3. Before plugging in, make sure the food and bottle warmer is switched to the setting .
4. Plug in the unit to the mains and switch the mains on.
5. Turn dial to setting to heat up food. The amber light will turn on to indicate the food and bottle warmer is switched on and is heating up.
6. Once the water is heated, the amber light will switch off to indicate that the thermostat will maintain the temperature of the water. It does not indicate that the food is ready.
To ensure that the food stays at the temperature you have selected, the thermostat will maintain the temperature of the water. In doing this the indicator light may switch to
amber whilst you are heating the food.
7. Heat food to the desired temperature. Ensure that the heating guidelines are followed to ensure that the food is not heated for too long. Please refer to table provided in
this leaflet.
8. Take care when removing the jar, as the surrounding water will be hot.
9. For your child's safety – Always check food temperature before feeding by testing on a sensitive part of your skin. Take care not to overheat the food.
10. During feeds the jar can be placed back in the food and bottle warmer to keep food warm by using setting
In doing this the indicator light will switch to amber to indicate the warmer is heating up.
11. Turn back the dial to setting and unplug the unit after feeding.
12. Empty the unit of any water and wipe dry.
HEATING GUIDELINES
INITIAL
TEMPERATURE
OF FOOD
150ml (5oz) 260ml (9oz)
Tommee Tippee Tommee Tippee
Closer to Nature bottle Closer to Nature bottle
SETTING
setting 3 setting 3
FROM FRIDGE
5 minutes 8 minutes
5˚C (40˚F)
ROOM TEMP
4 minutes 6 minutes
20˚C (70˚F)
is always used for heating up, setting is used for keeping warm
. The thermostat will maintain the temperature of the water. In doing this
. The thermostat will maintain the temperature of the water.
340ml (12oz) food jar
Tommee Tippee 113g (4oz)
Closer to Nature bottle
setting 3 setting 3
10.5 minutes 16 minutes
8 minutes 13 minutes
EN