Packard EDR-2000 Guia Del Usuario página 31

All manuals and user guides at all-guides.com
EDR-2000-UG.book Page 31 Jeudi, 20. octobre 2005 8:32 08
T
ROUBLESHOOTING
Problem Solution
• Connect the audio cables into the connectors securely.
• Verify the connection from the DVD recorder audio output to the TV or
No sound receiver audio input. Make sure the correct AUDIO input is selected on your
TV or amplifier.
• Refer to your audio amplifier owners manual.
• The scan mode of video output is incorrectly set. Press the PS/IS button on
No picture
(Black screen) the remote control to switch to correct mode.
• Connect the power plug into the wall outlet securely.
• Timer recording is active. Press Power or Stop to cancel time recording.
No response • The appliance might have encountered a technical failure. Unplug the power
supply and wait for 30 seconds before connecting it to the wall outlet again. If
it still doesn't work, try to restore the DVD Recorder to its factory settings.
• The remote control is not pointing at the DVD Recorder. Please aim at the
DVD Recorder.
Remote control
• Batteries are flat, replace batteries.
does not work
• The appliance might have encountered a technical failure. Unload batteries,
wait for 30 seconds before place them back into the remote control.
• Blank disc, replace the disc.
• Incompatible disc: please refer to the list of supported disc types.
• The disc is loaded with label side down. Make sure to load the disc with label
side up.
• Wrong region code. The region code does not match the region setting of the
Cannot play disc
DVD Recorder.
• Parental lock is on. Unlock the parental lock. Default password is 3308.
• Choose channel number on the TV set. Choose a correct channel number.
• The connection between the DVD Recorder and TV set is loose. Check the
connection.
• The TV set is not adjusted to the best status.
Poor playing
quality (distorted • The disc is dirty, clean the disc.
picture/sound)
• Interference may also make the picture distorted.
English -
31