Installation Steps; Care And Cleaning - LUND Interceptor Manual De Instrucciones

Installation Steps

Center part on front edge of hood and align holes.
3
With the fastener assembly inserted into hole in
hood, secure hood shield to hood by tightening
screw to expand well nut. Repeat for remaining
5
NOTE: DO NOT OVER TIGHTEN
Apply bump ons to surface of hood.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of
fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
fasteners.
®
branded products offered by Lund International, Inc. We take the utmost pride in our products
Lund International, Lund Accessories Division
300 Horizon Drive, Suwanee, GA 30024
800-328-5863 • Visit us at lundinternational.com
© 2007 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
NOTE: Observe the alignment from the side view in
order to guide the hood shield with its attached fastener
into the proper hole in the hood.
Hood
Hood
shield
4
6
Page 2 of 2
Fastener
assembly
Close Hood.