EN
Introduction
This instructions for use manual contains information intended
to ensure the safe, effective and compliant use of your product.
This manual is intended for in-service trainers, physicians, nurses,
surgical technologists, and biomedical equipment technicians.
Keep and consult this reference manual during the life of the
product.
The following conventions are used in this manual:
▪
A WARNING highlights a safety-related issue. ALWAYS comply
with this information to prevent patient and/or healthcare staff
injury.
▪
A CAUTION highlights a product reliability issue. ALWAYS
comply with this information to prevent product damage.
▪
A NOTE supplements and/or clarifies procedural information.
For additional information, including safety information, in-
service training, or current literature, contact your Stryker sales
representative or call Stryker customer service. Outside the US,
contact your nearest Stryker subsidiary.
NOTE: The user and/or patient should report any serious product-
related incident to both the manufacturer and the Competent
Authority of the European Member State where the user and/or
patient is established.
Indications For Use
See the instructions for use supplied with the handpiece.
Contraindications
See the instructions for use supplied with the handpiece.
Description
The Locking Keyless Chuck handles wires, pins, drill bits, and
reamers up to 1/4 inch (6.4 mm) diameter. The chuck can be
operated in forward, reverse, or oscillation modes. Length: 108.7
mm; Diameter: 33 mm; Weight: 285 g
NOTE: The Locking Keyless Chuck is supplied with a key; however,
the key is used ONLY when the accessory cannot be removed by
hand. See the To Remove an Accessory section.
2
8203-133-700 Rev-AA
www.stryker.com