GE IM-4 Manual Del Usuario página 48

WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS P
Are these the right instructions for your model? Follow the Installation Instructions indicated by
the label on the back of the refrigerator—
BEFORE YOU BEGIN
Read each step thoroughly before proceeding.
CAUTION –
•
Refrigerator. To eliminate the danger
of electric shock during installation,
you must unplug the refrigerator from
its electrical outlet.
TOOLS YOU WILL NEED
Flat blade and Phillips
screwdrivers
1/4" and 5/16" Nutdrivers
REMOVE THE COVER
1
Remove the screws holding the left side of the
compressor cover and save them for reinstallation
later. Bend the cover back to access the
compartment.
All manuals and user guides at all-guides.com
Installation Instructions
C F
Unplug the
Pliers Sharp knife
G H J K L M N
ATTACH THE WATER VALVE
2
• Locate the female connector plug (B). Plug the
female connector (B) onto the male terminals
on the water valve (4). Either wire can go on
either terminal.
B
4
• Fasten the water valve to the cabinet using the
hex-head screw (13) from the kit.
13
48
or R
P Q